♦ Over Voltage Protectors

● DIO1280      30V 30 mΩ 125ns+100V surge, default 6.8V CSP-12
● DIO1280C    30V 30 mΩ 125ns+100V surge, default 5.85V CSP-12
● DIO1281      30V 20 mΩ 125ns+100V surge, default 14V CSP-12

♦ Chargers
● DIO59020    I2C 5V2A charge +1A OTG
● DIO59015    I2C 5V1.5A charge +1A OTG
● DIO59120    5V2A charge +1A OTG
● DIO5508      5V1A charge DFN3*3-10
● DIO5538B    Ultra-Thin 5V0.1A charge for wearable DFN1.8*2*0.4-6
● DIO6832      5V2A boost charge for 2-cell Li-battery


♦ Backlight Drivers
● DIO5661S    37V1.3A 1.1Mhz  PWM 1%,SOT23-6
● DIO5661C    37V1.3A 1.1Mhz  PWM 1%,DFN2*2-6
● DIO5310      39V1.6A  0.85Mhz 1-wire 32 level,SOT23-6
● DIO5361      42V1.6A  0.85Mhz 1-wire 32 level,DFN2*2-6


♦ Boost Convertors
● DIO6305     Sync 1.2M 1.1A boost for OTG,SOT23-6


♦ Flash LED Drivers
● DIO5151     1A/0.4A 2Mhz charge pump ,DFN3*3-10
● DIO5180     Dual 1.5A/0.4A 2Mhz boost ,DFN3*2-14
● DIO5644     Dual Independent 1.5A/0.7A 4Mhz with I2C,CSP1.2*1.3-12


♦ LCD Bias Drivers
● DIO5630     I2C dual output bias driver,CSP1.5*2-15


♦ Analog Switches
● DIO3202     Dual SPDT for USB/Audio/UART,DQFN-10
● DIO3203     Dual SP3T for USB/Audio/UART,DQFN-12
● DIO3212     Dual SPDT for USB/MHL,QFN-10
● DIO32220   Dual SPDT for USB/MHL,DQFN-10
● DIO32320   Dual SPDT for USB/MHL,DQFN-10
● DIO1717     Dual SPDT for Audio/Data,DQFN-10
● DIO1159     Single SPDT for Data,DFN1.8*2-6/SC70-6


♦ MIPI Switches
● DIO1644     4 data lane 1.8G switch,CSP-36
● DIO1646     4 data lane 2.3G switch,CSP-36


♦ Power Switches
● DIO7330     40mohm, 3A Load Switch,DFN1.2*1.6-4


♦ Buck Convertors
● DIO62560    Sync 1.5Mhz 0.6A buck for wearable core,DFN2*2-6 


留言板

留言板

姓名
邮箱
验证码点击更换
问题
发送